(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/375227_10150544261414552_403563559551_11817576_997965098_n.jpg)
You've outdone yourself!
very nice contrast against that lace doily :D
Nice.
I'm pretty sure whosever tour van that ends up in will get searched.
Yep. Didn't think of that. Think of poor Willie Nelson.
Ha, I was gonna mention that's not the amp to take on tour..."Mind if we look around?"
why does everyone mention either the plates or doily? This one is for Core9. Ron from Curse the Son
Quote from: Jake on November 13, 2011, 04:17:38 PM
Nice.
I'm pretty sure whosever tour van that ends up in will get searched.
That's OK cuz touring is unlikely :'(
Been searched after a gig before by Maine State Troopers after playing Hempstock. Fuckin 3 cars, dogs, the works!
Pulled all the shit out, went through the whole fuckin car....then a 6 hr ride home......good times.
Regardless that amp fuckin destroys..
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/377629_10150544634549552_403563559551_11819337_1770636442_n.jpg)
Love it.
Curse of the Son is a Christian rock band, yes?
Quote from: dunwichamps on November 13, 2011, 04:45:42 PM
why does everyone mention either the plates or doily? This one is for Core9. Ron from Curse the Son
Because some of us have had our vans ripped apart by cops for less than an amp with "Weed" on the front? It looks badass, I'm just sayin'
Quote from: dunwichamps on November 13, 2011, 05:58:03 PM
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/377629_10150544634549552_403563559551_11819337_1770636442_n.jpg)
Simply Fucking Awesome!!!
Is it just the tubes that make it light up or are there some leds?
WANT!!!
Oh Fucking Awesome!!!
That looks killer!!
Quote from: spookstrickland on November 13, 2011, 06:32:16 PM
Quote from: dunwichamps on November 13, 2011, 05:58:03 PM
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/377629_10150544634549552_403563559551_11819337_1770636442_n.jpg)
Simply Fucking Awesome!!!
Is it just the tubes that make it light up or are there some leds?
Two very bright Green LEDs which are actually put into the plexi, i drill the side and then attach them, those are the 2 strong green lights on the side
Quote from: Jake on November 13, 2011, 06:03:04 PM
Love it.
Curse of the Son is a Christian rock band, yes?
Not that I know of, just unadulterated doom
Quote from: Jake on November 13, 2011, 06:03:04 PM
Love it.
Curse of the Son is a Christian rock band, yes?
Curse the Son is not a Christian rock band. Not Satanic either! ;D
Quote from: Metal and Beer on November 13, 2011, 06:10:18 PM
Quote from: dunwichamps on November 13, 2011, 04:45:42 PM
why does everyone mention either the plates or doily? This one is for Core9. Ron from Curse the Son
Because some of us have had our vans ripped apart by cops for less than an amp with "Weed" on the front? It looks badass, I'm just sayin'
The thought never really crossed my mind to be honest....but fuck it, I am what I am....I'm Popeye the Sailor Man!
Quote from: core9 on November 13, 2011, 09:35:27 PM
Quote from: Jake on November 13, 2011, 06:03:04 PM
Love it.
Curse of the Son is a Christian rock band, yes?
Curse the Son is not a Christian rock band. Not Satanic either! ;D
Damn i was waiting for a few Stryper covers this show.
Quote from: dunwichamps on November 13, 2011, 08:49:35 PM
Quote from: spookstrickland on November 13, 2011, 06:32:16 PM
Quote from: dunwichamps on November 13, 2011, 05:58:03 PM
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/377629_10150544634549552_403563559551_11819337_1770636442_n.jpg)
Simply Fucking Awesome!!!
Is it just the tubes that make it light up or are there some leds?
Two very bright Green LEDs which are actually put into the plexi, i drill the side and then attach them, those are the 2 strong green lights on the side
Thanks, man that just kicks so much ass, you should build some more of those, what did that one cost?
Quote from: spookstrickland on November 13, 2011, 09:43:27 PM
Quote from: dunwichamps on November 13, 2011, 08:49:35 PM
Quote from: spookstrickland on November 13, 2011, 06:32:16 PM
Quote from: dunwichamps on November 13, 2011, 05:58:03 PM
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/377629_10150544634549552_403563559551_11819337_1770636442_n.jpg)
Simply Fucking Awesome!!!
Is it just the tubes that make it light up or are there some leds?
Two very bright Green LEDs which are actually put into the plexi, i drill the side and then attach them, those are the 2 strong green lights on the side
Thanks, man that just kicks so much ass, you should build some more of those, what did that one cost?
Around 1600 I charged. I am low balling it, considering the number of labor hours involved
You need to ship two of these off to Matt Pike so he can stop using those Soldano's and sell you a bunch more amps.
Quote from: dunwichamps on November 13, 2011, 05:58:03 PM
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/377629_10150544634549552_403563559551_11819337_1770636442_n.jpg)
Groovy....that looks so awesome :)
wonder how it sounds like tho..
Quote from: clockwork green on November 14, 2011, 12:55:32 AM
You need to ship two of these off to Matt Pike so he can stop using those Soldano's and sell you a bunch more amps.
Fuckin' right.
looks dope. make a demo!
She sounds like this,
http://www.youtube.com/watch?v=oL3kVE03a6g
http://www.youtube.com/watch?v=CJT1rk_kJl8&feature=related
http://www.youtube.com/watch?v=LWpFxpM7DOI&feature=related
recordings not so proper as its just a camera
Also see the FAC OFF Clips, same amp
I would say like a cleaner orange/matamp with a power amp like a Sunn or a Superbass (with 88s) built for heavy pedal overdrive.
Looks and sounds great man. Wish I knew how to build amps, guess I'll stick to pedals :'(
Awesome to see someone else using the pinky finger for the power/fifth chord also ;)
Quote from: Mike_Sims on November 14, 2011, 01:10:20 AM
Looks and sounds great man. Wish I knew how to build amps, guess I'll stick to pedals :'(
Awesome to see someone else using the pinky finger for the power/fifth chord also ;)
the pinky brotherhood. for the truest doom
TMthanks for the compliments. Amps can be achieved just takes time, patience, and a little nerve to overcome potential death when building
Quote from: dunwichamps on November 14, 2011, 01:06:42 AM
She sounds like this,
http://www.youtube.com/watch?v=oL3kVE03a6g
http://www.youtube.com/watch?v=CJT1rk_kJl8&feature=related
http://www.youtube.com/watch?v=LWpFxpM7DOI&feature=related
recordings not so proper as its just a camera
Also see the FAC OFF Clips, same amp
I would say like a cleaner orange/matamp with a power amp like a Sunn or a Superbass (with 88s) built for heavy pedal overdrive.
nice! :)
i have to say..that's the coolest amp head i've ever seen and heard.... very creative.
Quote from: clockwork green on November 14, 2011, 12:55:32 AM
You need to ship two of these off to Matt Pike so he can stop using those Soldano's and sell you a bunch more amps.
while that would be nice, I think Pike is pretty endowed to his SLO, he has had that for a long time. Now that Marshall he plays live, thats a potential target. Its the Kerry King Sig i think with 88s.
Quote from: Isabellacat on November 14, 2011, 01:15:24 AM
Quote from: dunwichamps on November 14, 2011, 01:06:42 AM
She sounds like this,
http://www.youtube.com/watch?v=oL3kVE03a6g
http://www.youtube.com/watch?v=CJT1rk_kJl8&feature=related
http://www.youtube.com/watch?v=LWpFxpM7DOI&feature=related
recordings not so proper as its just a camera
Also see the FAC OFF Clips, same amp
I would say like a cleaner orange/matamp with a power amp like a Sunn or a Superbass (with 88s) built for heavy pedal overdrive.
nice! :)
i have to say..that's the coolest amp head i've ever seen and heard.... very creative.
thank you very much
b4 this one I did this
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/249790_10150330405359552_403563559551_10097811_6465440_n.jpg)
1st Plexi
But maybe the most beautiful amp I think I have done is this
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/249681_10150330405334552_403563559551_10097810_7184669_n.jpg)
That was a verb clone of an Green era Matamp
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/184054_10150392936334552_403563559551_10689646_6027712_n.jpg)
StereoHeadPhone Amp
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/253636_10150330405184552_403563559551_10097805_8302169_n.jpg)
Sunn 200S Inspired Bass Amp
heh, I use my pinky too. I have no control/dexterity in my ring fingers so its pinky for the lowest 5 frets or so. I can't even do the vulcan live long and prosper hand gesture.
I sure do love those amp and stompboxes though man.
Quote from: bitter end on November 14, 2011, 01:18:48 AM
heh, I use my pinky too. I have no control/dexterity in my ring fingers so its pinky for the lowest 5 frets or so. I can't even do the vulcan live long and prosper hand gesture.
I sure do love those amp and stompboxes though man.
gracias, things have been blooming as to say, I have gotten attention lately. Glad people enjoy what I do. I try to do some kool shit, not everyone is going to like it but thats the game
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/377224_10150545378804552_403563559551_11823498_428121278_n.jpg)
Great looking amps. If you don't get Matt Pike I could consider switching to your amps, just send me one and I'll try it out. kthx! ;)
Quote from: Volume on November 14, 2011, 02:20:40 AM
Great looking amps. If you don't get Matt Pike I could consider switching to your amps, just send me one and I'll try it out. kthx! ;)
Wish I had the dough to make em to send out for folks but its all ordered to serve to i cant. Too small of a company (if you could even call it that)
Yeah I know. I'd seriously consider putting in an order though, if it wasn't for something called the Atlantic Ocean driving up the shipping costs. Seems like a bargain for a custom hand made amp.
Quote from: Volume on November 14, 2011, 02:38:06 AM
Yeah I know. I'd seriously consider putting in an order though, if it wasn't for something called the Atlantic Ocean driving up the shipping costs. Seems like a bargain for a custom hand made amp.
yea customs and shipping blow, it more or less forces u to find someone there to get one.
Although I may be doing one overseas in the UK next year, time will tell
You should start selling kits. That would rule.
Quote from: BrianDamage on November 14, 2011, 02:44:49 AM
You should start selling kits. That would rule.
possible
pretty hard to replicate tho
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/300632_10150481110939552_403563559551_11427276_1547903552_n.jpg)
Hi res link here
http://img13.imageshack.us/img13/8645/img0163wh.jpg
I didn't figure it would be an easy build but would still like to try. I want to build an amp but I have no clue where to start.
Quote from: BrianDamage on November 14, 2011, 02:54:51 AM
I didn't figure it would be an easy build but would still like to try. I want to build an amp but I have no clue where to start.
Just start out with a basic kit dude, get the craft down. I'm thinking of doing the same.
Quote from: dunwichamps on November 14, 2011, 02:46:12 AM
Quote from: BrianDamage on November 14, 2011, 02:44:49 AM
You should start selling kits. That would rule.
possible
pretty hard to replicate tho
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/300632_10150481110939552_403563559551_11427276_1547903552_n.jpg)
Hi res link here
http://img13.imageshack.us/img13/8645/img0163wh.jpg
What's the pot on the inside do?
purple pilot light would be cool (edit: re: reply #8)
WOW!!! Great!!!Does it have bandaxal? What is the Iron? Looooks STURDY
Quote from: dunwichamps on November 14, 2011, 02:46:12 AM
pretty hard to replicate tho
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/300632_10150481110939552_403563559551_11427276_1547903552_n.jpg)
Quote from: Mike_Sims on November 14, 2011, 04:02:22 AM
Quote from: BrianDamage on November 14, 2011, 02:54:51 AM
I didn't figure it would be an easy build but would still like to try. I want to build an amp but I have no clue where to start.
Just start out with a basic kit dude, get the craft down. I'm thinking of doing the same.Quote from: dunwichamps on November 14, 2011, 02:46:12 AM
Quote from: BrianDamage on November 14, 2011, 02:44:49 AM
You should start selling kits. That would rule.
possible
pretty hard to replicate tho
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/300632_10150481110939552_403563559551_11427276_1547903552_n.jpg)
Hi res link here
http://img13.imageshack.us/img13/8645/img0163wh.jpg
What's the pot on the inside do?
adjusts the LED intensity
Quote from: HeavyEar on November 14, 2011, 05:14:09 AM
WOW!!! Great!!!
Does it have bandaxal? What is the Iron? Looooks STURDY
Quote from: dunwichamps on November 14, 2011, 02:46:12 AM
pretty hard to replicate tho
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/300632_10150481110939552_403563559551_11427276_1547903552_n.jpg)
Yup Bax, with Dynaco Reproduction iron
Quote from: BrianDamage on November 14, 2011, 02:54:51 AM
I didn't figure it would be an easy build but would still like to try. I want to build an amp but I have no clue where to start.
Yes starting somewhere is a little tricky. Pick a weber kit IMO, and then you can begin there
the real question is, whats the price point?
for this amp shown here, its in the 1600-1700 range
First finger and pinky chords and chord vibrato all day. ;)
Quote from: fallen on November 14, 2011, 03:02:00 PM
First finger and pinky chords and chord vibrato all day. ;)
fuckin approved
Quote from: dunwichamps on November 14, 2011, 02:59:59 PM
for this amp shown here, its in the 1600-1700 range
I'll probably be contacting you in the near future (hopefully). After I order a shitload of hex cabs from Gentry Densley
Quote from: Mike_Sims on November 14, 2011, 08:15:40 PM
Quote from: dunwichamps on November 14, 2011, 02:59:59 PM
for this amp shown here, its in the 1600-1700 range
I'll probably be contacting you in the near future (hopefully). After I order a shitload of hex cabs from Gentry Densley
dually noted. Let me know
Beautiful amps.
gracias
Sorry if this has already been asked, but are you making the head shells and/or speaker cabs yet?
I dont make headshells, I outsource. I can get Emperor headshells, Weber, or custom stuff through another vendor
I dont make cabs really either.
I lack the wood working skills
Ok, I wasn't sure.
Quote from: bitter end on November 14, 2011, 09:03:20 PM
Ok, I wasn't sure.
No thats no problem. I gotta admit where I suck, and I just do not have the talent to do headshells. maybe in the future or maybe i get a cab maker to work for me!
^Look for local cabinet makers, and furniture makers, they can do everything except load the speakers, and that would be a peice of cake for you. hell they can make em with weed compartments and you can put hemp speakers in em to fool the dogs.
Beautiful
Nice! I can't believe you guys get searched for that, here in Holland they use infrared choppers to find people who grow it.