how do you guys set your EQ? i want to explore some new tones.
i have my amp (peavey VTM 60) set up like this:
Low 6 (or 7)
Mid 5 (or 6)
high 4
prescence : 3 or 4
If you. want to explore TURN THE KNOBS you need help wit that? ::)
Quote from: Hemisaurus on September 15, 2011, 03:46:22 PM
If you. want to explore TURN THE KNOBS you need help wit that? ::)
wait . . . do i turn them to the left, or the right? :-\
I tend to go for a more snarly tone for guitar - Mid between 8 and 10, Treble between 6 and 8, bass usually at 5.
Bass is a little more complicated.
differnt amps have difernt tone stacks right?
Like on a fender the treble knob juts removes bass or some shit no?
Id say its highly dependent on your individual amp and as Hemis suggested a little knob turning is in order.
hmmm everything really sounds the same on my Laney AOR maybe its cause im always tuned to b-flat and that ive needed to change my tubes for about 2 months i don't even remember what it use to sound like
Quote from: justinhedrick on September 15, 2011, 04:18:39 PM
Quote from: Hemisaurus on September 15, 2011, 03:46:22 PM
If you. want to explore TURN THE KNOBS you need help wit that? ::)
wait . . . do i turn them to the left, or the right? :-\
They go both ways, unless you have Laney, then they go in and out as well.
I got a vtm120, and for guitar, I go,(with a stratcopy) low, 2-3, Mid 10, high 2 presence 2 or 3. and turn low dip switches on, and mid on(up) keep comp off and the last treble(the one that lowers the frequency where the presence starts) on. It cops that matamp sound a little better. Low input, gain at 10 both gain switches on.
explore those dip switches, they totally change the character of that amp.
but try that, and play funk 49. For bass I use the same dip switches I just have bass on 7-8 mid 10 treble around 6 or 7 Presence slightly higher at 4-6.Low input both gain switches on.
Its the sweet spot for me. Also, that low gain input allows alot more lows in.
I want one of those laneys. Goddam those boosts are evil.
the boost is indeed very cool i usually have the mids boosted. i mess around with the bass boost but i feel like its gonna blow my 4x12 cab up with my normal settings and just having the bass boost on
Quote from: SpaceTrucker on September 15, 2011, 04:54:34 PM
I got a vtm120, and for guitar, I go,(with a stratcopy) low, 2-3, Mid 10, high 2 presence 2 or 3. and turn low dip switches on, and mid on(up) keep comp off and the last treble(the one that lowers the frequency where the presence starts) on. It cops that matamp sound a little better. Low input, gain at 10 both gain switches on.
explore those dip switches, they totally change the character of that amp.
but try that, and play funk 49. For bass I use the same dip switches I just have bass on 7-8 mid 10 treble around 6 or 7 Presence slightly higher at 4-6.Low input both gain switches on.
Its the sweet spot for me. Also, that low gain input allows alot more lows in.
hmm. at this point i only have the "low 1" switch engaged. i didn't realize the last treble switch messed with the prescence knob. that's good to know because that thing gets spikey!
i go low gain input all the way as well. i usually run my master at 3 or clock (or wide open) and my pre gain at 5 or 6.
I have the AOR schematic somewhere, you night be able to fit a boost, though I'm thinking Peavey probably PCB mounted pots, may be a little trickier. :o
^dude, I think the whole damn amp is pcb mounted.
If I get a few bucks(yeah right) I'll bmail you about hotrodding the thing.
I want a simple matamp mstrvm turret-board amp. maybe with some kind of built in effect.
and call it the fatamp. :)
Quite a few, well a fair few, new sockets, new pots, new turretboard, new components. Would you EL-34 it, at a guess if I could get the plate voltage high enough the transformer should be good for EL34's too.
(http://reevesamps.com/assets/amps/custom225/large1.jpg)
On My 800: Bass:10 Mids: 10 Treble: 0 Presence: 0
on my T: bass:5 Mids: 7 Treble: 7 Presence: 3
Low - up there a bit, Mid - kinda up there too, Hi - not so much, Volume - pretty high. No presence knob.
Orange Overdrive
FAC - 0 (first click or whatever you call it)
Bass - Almost all the way up, 4-5 o'clock
Treble - 1-2 o'clock
Presence - around 1 o'clock
Gain - as high as they'll let me ;)
Master - All the way!
Every now and then I'll experiment with turning the master down a bit and upping the gain.
I can't handle my vtm up past 5 or 6, but I'm afraid the tubes will blow. I know their on their way out so I'm babying it.
also hemi, I just realized how far away you are, and it wouldn't make sense spending over 100$ to get my amp their and back. But, if I get a great job. and got the cash, You are the first person I will go to before I think about buying a new tube head.
Mesa 50/50 (no tone controls)
Channel A (into 1968 Sunn 4x12 w/ original spkrs): Volume 10, Presence 10.
Channel B (into Avatar 2x12 w/ G12H30s): Volume between 4 & 6, presence between 3 & 6 depending on the room.
Quote from: SpaceTrucker on September 16, 2011, 02:33:34 PM
I can't handle my vtm up past 5 or 6, but I'm afraid the tubes will blow. I know their on their way out so I'm babying it.
also hemi, I just realized how far away you are, and it wouldn't make sense spending over 100$ to get my amp their and back. But, if I get a great job. and got the cash, You are the first person I will go to before I think about buying a new tube head.
I'm starting to wonder about branding, rather than touring.
Would people rather see Hemisaurus the band, or own Hemisaurus the amp ???
Laney GH50L
bass 10
mids 3-4
treble 3-4
presence 0
gain 10
gain 10
METAL!
practice volume 2.5-3
solo volume usually between 1 and 1.5 unless I feel like ripping it up for a few minutes
The GH doesn't have the pull knob boosts. If I wanted more bass I'd just use an eq pedal.
Aside from how it breaks up way too soon it's a great amp. I'm fixing that problem now by slaving it into a solid state amp.
Bogen CHB-50
Bassman circuit
Pre-7
Master -5
Bass-5
Treble-10
It's woofy even through 4x10's. My MKII is bright too.
I like a lot of bass, almost as much midrange, a sprinkle of treble/presence, alot of pre/gain and a lot of poweramp (exact mileage varies from amp-to-amp, etc.)
hemi, I'd like to see both. But you should start building amps. Your a very knowledgeable person on the electronic front. Who wouldn't want to play thru a hemi? the hemi raptor(small combo), the hemi allisoar(100watt amp) and the hemi T REX! (the svt eater.) You could post clips called bites.
Man the possibilities are endless.
VTM 60. My eq settings are all over the map, depending on what mood I'm in. Right now I have a pretty good chunky thrash thing going on. mod settings: Gain1, Gain2, Comp, Low1, and high1. Low, mid, and high all around 6 (it works for me), presence around 3-4. I won't bother telling you my pre/post settings, as this is for "quiet" basement playing. I'm sure if I ever get to turn this thing up past 1, everything will have to change. And of course, if Hayseed ever gives me my Screamer back, that will change things as well.
I'd play a Hemi.
I'd even let you spraypaint it.
I guess the Raptor would be first, or something with like a duet of power tubes.
Or maybe just the preamp first, in rack or pedal form?
Head form. I'll even(if you send postage) send you my webster teletalk for a headcase(heh) One that can fit on top a power amp and be shallow enough to not effect the exhaust vents.
well thatd be me. Maby give it a 1 watt switchable power section for practice? Idk just throwing out ideas.
the teletalk comes with a working westinghouse 6l6gc. If that gets you wet.
That's what gets me every time. I think well all this effort, I might as well throw in a power tube, say a single 6550 or something, then you go looking at output transformers, and nothing gets done.
Does the teletalk come with a transformer?
Yes, power section can be switched off, for preamp only use ;D
A 6L6 can go to about 12W, if pushed, but is probably run at 5 or so to prolong tube life. So what is the postage like?
Yeah... about a gallon of milk worth of weight to it and all the tubes its got(6l6 5y3gt 6j7) all kinds of little transformer looking things. But I don't think their wax potted(if that matters). I totally took it apart. I left as much leads as i possibly could.
Its like a little 30 watt pa , that looks like a radio. Hell I'll even throw in a 6 inch old oxford speaker that works!(I threw away the original speaker, the cone had disinegrated and my dumb as threw it in the woods) only problem, the speaker don't fit in the teletalk and its very low power(according to the letter the lower the letter the lower the wattage, and the letter is B so..)
QuoteA 6L6 can go to about 12W, if pushed, but is probably run at 5 or so to prolong tube life. So what is the postage like?
A 6L6 is more like 25-30 watts.
Where you at hemi? midwest somewhere right?
zip code?